Ductfill 307 is a factory blended non shrink cementitious grout having good pumping, rapid strength development and early gel time characteristics.

Pozament Concrete Structure Grout is a high strength cementitious grout comprising of low alkali high specific area Portland cements and other cementitious binders combined with high purity aggregates and a system of compatible admixtures to achieve high in-service performance. This grout has high flow characteristics to achieve penetration and levelling with no bleed and zero shrinkage when placed at 0.18 water solid ratio.

CemThix is a shrink compensated high early strength cementitious thixotropic grout that contains no chlorides. It is designed to produce a high strength grout or mortar for structural support of precast panels.

A grout suitable for rock and cable bolting must have some expansion to enhance bond and anchorage. It must provide protection to the bolts and cables in aggressive ground conditions, have an early gel time, and achieve a rapid strength development for early support. It must be easily mixed with water to a consistency that will flow through 6mm diameter apertures required when using GRP bolts and into any fractured ground around cable bolt holes. Grout effectiveness can be checked by using a rock bolt/cable bolt pull out test. This should not be carried out until the minimum cure period of 28 days.

Astrablend is a one bag monolithic packing material for use where long-distance pumping is not required. Astrablend is a high water usage system with reduced pH levels.

These are pre-blended cementitious grouts manufactured using ordinary Portland cement, selected fillers and Polymeric anti-wash-out additives which have good pumpable qualities when mixed with water. The heat of hydration is low with minimal plastic shrinkage characteristics.