Cement based binder for producing an early drying high strength floor screed.


Cemscreed is a cement based binder for producing an early drying high strength floor screed when mixed with graded aggregates and water.

As the binder is mixed under controlled conditions all that is required at site is the addition of a suitable aggregate and water thereby improving the control of components critical to the performance of the finished screed.

Cemscreed is used to produce bonded, unbonded and floating screeds in internal situations where early foot traffic and quicker drying is required e.g. to allow floor coverings to be laid with shorter installation times.


Where can Cemscreed be used?

Internal floors

Cemscreed can be used for repair or laying new floors in schools, supermarkets and domestic properties.

Underfloor heating

Cemscreed is suitable for use over underfloor heating systems.

Repair work

Cemscreed can be used for the rapid repair of existing floor screeds.

Why use Cemscreed?

Additional info

Depth of screed 3:1 4:1
25mm 1.8m2 2.4m2
30mm 1.5m2 2.0m2
35mm 1.3m2 1.7m2
40mm 1.1m2 1.5m2
50mm 0.9m2 1.2m2
60mm 0.75m2 1.0m2

Approximate coverage per 20kg bag.

Packaging and Storage - Tarmac Cemscreed is available in nominal 20kg sacks, palletised and shrink wrapped. Tarmac Cemscreed may also be available in Intermediate Bulk Containers or in Bulk Powder Tankers.

Palletised Tarmac Cemscreed should be stored in cool dry areas clear of the ground, sheeted or under cover and stacked not more than two pallets high.

The product should be used on a first in – first out basis. Shelf life is minimum 3 months when properly stored but could be in excess of 6 months subject to temperature and humidity.

Quality control - All Pozament products are factory blended, tested and packaged to quality control procedures in accordance with BS EN ISO 9001.

For sales and technical contact: